Misc Links
Forum Archive
News Archive
File DB

Ultra X2 550W / Ultra X-Finity 500W / Ultra X-Finity 600W
Posted by News-Bot on June 06th 2006

Whether it was running MemTest86 with a 2GB kit of memory at DDR540for 297 hours straight, or dual priming an X2 3800+ at 2.9GHz and an Asetekwater kit for over 48 hours, or finding the maximum 2.5-3-3-5 frequency of atrick TCC5 kit and passing 310HTT 1:1 on chilled water, none of the systemshad a failure, reboot, or random possible power related issue. Voltagealways remained within specification but did drop below 12v on occasionunder heavy loads with a couple of the units but for the most part they allseemed to hold their own.

View article at overclockersonline.com

(Due to past abuse from spammers you must be a registered forum member to post comments, and must be logged in)

corner image

This site best viewed in a W3C standard browser at 800*600 or higher
Site design by Red Squirrel | Contact
© Copyright 2018 Ryan Auclair/IceTeks, All rights reserved