Misc Links
Forum Archive
News Archive
File DB

Cooler Master Aquagate Mini R120 Watercooling Kit
Posted by Red Squirrel on May 02nd 2005

The pump comes fitted with a 3-pin connector that can be plugged right into a motherboard fan header. This allows the PC to monitor pump speed just like it would the fan on a heatsink. However, the pump is rated for up to 600 ma (7.2 watts), which is typically above the capacity of some mobo fan headers. I used a 3-pin to 4-pin adapter with a separate tach lead so I could power the pump from a 4-pin Molex connector and still send the tach signal to the mobo to monitor pump operation.

View article at pcper.com

(Due to past abuse from spammers you must be a registered forum member to post comments, and must be logged in)

corner image

This site best viewed in a W3C standard browser at 800*600 or higher
Site design by Red Squirrel | Contact
© Copyright 2019 Ryan Auclair/IceTeks, All rights reserved