Misc Links
Forum Archive
News Archive
File DB

Thermaltake BigWater Review
Posted by Red Squirrel on November 15th 2004

The entire waterblock is copper with a see-through acrylic cover. The copper
combined with the shiny acrylic is just gorgeous. The overall design of the
waterblock is well done and aesthetically pleasing. Four screws securely attach the
acrylic cover to the copper base. Two barbs are centered evenly for a symmetrical
look. Under the screw down caps are 5/16in prongs to attach the tubing. Between the
barbs you can see the pathway for the liquid cooling. In the right hand corner you
can see the small LED encased in the acrylic cover. The LED is blue to light up the
entire block. This waterblock is universal; with the included clamps it is designed
to fit Intel P4 socket 775, P4, AMD K8, and AMD K7.

View article at GruntVillE

(Due to past abuse from spammers you must be a registered forum member to post comments, and must be logged in)

corner image

This site best viewed in a W3C standard browser at 800*600 or higher
Site design by Red Squirrel | Contact
© Copyright 2020 Ryan Auclair/IceTeks, All rights reserved