|
|
Posted by newsbot on July 01st 2009 Once the dynamic overclock setting has been enabled you then must pick the percentage of the overclock. You can select a CPU overclock of either 8%, 15% or 24%, for a maximum overclock of 2GHz. Once the percentage picked you just load the operating system like normal and use the Wind U100. When you are ready for a little more processor power you just need to press Fn+F10, and 'Turbo' mode will be enabled. You have to be plugged into AC power for the setting to work and you should see one of the above icons when you enable or disable the feature. Our MSI Wind U100 was unstable with an overclock of 24% due to instability of the memory module. That means the highest overclock that could be reached was 15%, which is still a great overclock on the Intel Atom N270 processor.... View article at legitreviews.com |
![]() |
This site best viewed in a W3C standard browser at 800*600 or higher Site design by Red Squirrel | Contact © Copyright 2018 Ryan Auclair/IceTeks, All rights reserved |