Misc Links
Forum Archive
News Archive
File DB

Swiftech H20-220 Apex Ultra Watercooling Kit
Posted by News-Bot on October 17th 2006

----Finally, I got to the point where the system was pretty much solid with opaque, light green liquid, which had lots and lots of air bubbles in suspension. This isn't great, but with a properly setup circuit (reservoir being at the top, remember?), all the air will filter to the top of the reservoir and the coolant in the circuit will slowly be purged of bubbles. You might want to tap and rotate the various components while the pump is running, so that bubbles will dislodge and be carried to the reservoir by the coolant.----

View article at overclockers.com.au

(Due to past abuse from spammers you must be a registered forum member to post comments, and must be logged in)

corner image

This site best viewed in a W3C standard browser at 800*600 or higher
Site design by Red Squirrel | Contact
© Copyright 2018 Ryan Auclair/IceTeks, All rights reserved